3A Roland SP-540V

eco-solvent-dx4-printhead-roland-sp-540i-roland-sp300-for-epson-dx4-solvent-printer-head

3A Roland SP-540V printer

The machine is the “Print & Cut” machine that combines the two functions of high-quality printing and outline cutting
in a single unit. This makes possible not only use as either a printer or a cutting machine, but also enables versatile
uses such as performing printing followed immediately by cutting, without having to first remove the media from the
machine.
The machine is provided with a crop-mark feature. This makes possible accurate alignment when you want to remove
the media after printing, perform lamination or other processing, then load the media again to perform cutting.
Also, two heaters are built in: a print heater and a dryer. These help to fix and dry the ink, thereby enhancing work
efficiency. The temperature setting for each can be preset to match the ambient environment and the media used.
With these features, the machine can accommodate a wide variety of uses, ranging from the creation of stickers and
cut-out text and small-lot label printing to the production of panels, outdoor signs, and more.

Specifications
Model	SP-540V
Printing/Cutting method	Piezo ink-jet method/media-moving method
Printing resolution (Printing dot resolution)	Maximum 1440 dpi
Acceptable media widths	210 to 1371 mm (8-5/16 to 54 in.)
Printing/Cutting width (*1)	Maximum 1346 mm (53 in.)
Ink cartridges	Capacity: 220 cc ±5 cc Color: Four colors (cyan, magenta, yellow, and black)
Acceptable tool	Special blade for CAMM-1 series
Cutting speed	10 to 300 mm/s
Blade force	30 to 300 gf
Blade offset compensation	0.000 to 1.500 mm (0 to 0.0591 in.)
Software resolution (When cutting)	0.025 mm/step (0.000984 in./step)
Distance accuracy While the print heater and (When printing)	While the print heater and dryer are running: Error of less than ±0.4% of distance traveled, or ±0.5 mm, whichever is greater While the print heater or dryer are not running (*3): Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Distance accuracy (When cutting) (*4	Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CALIBRATION] – [CUTTING ADJ.] has been made): Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater
Repetition accuracy (When cutting) (4)(5)	±0.1 mm or less
Repetition between printing and cutting (4)(6	±0.5 mm or less
Alignment accuracy for printing and cutting when reloading media (4)(7)	Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater
Media dryer (*8)	Heating method, Setting range for the preset temperature: 35 to 50°C (95 to 122°F)
Ink -fixing device (*8)	Print heater, Setting range for the preset temperature: 35 to 50°C (95 to 122°F)
Interface	Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power-saving function	Automatic sleep feature (compliant with the International ENERGYSTAR ® Office Equipment Program)
Power supply	Voltage and frequency: AC 100 to 120 V ±10%, 50/60 Hz or AC 220 to 240 V ±10%, 50/60 Hz Required power capacity: 8.8 A (100 to 120 V) or 4.7 A (220 to 240 V)
Power consumption	During operation: Approx. 1080 W (100 to 120 V) or 1230 W (220 to 240 V) Sleep mode: Approx. 30 W
Acoustic noise level	During operation: 64 dB (A) or less (according to ISO 7779) During standby: 40 dB (A) or less (according to ISO 7779)
Dimensions (With stand)	2390 (W) x 800 (D) x 1291 (H) mm (94-1/8 (W) x 31-1/2 (D) x 50-7/8 (H) in.)
Weight (With stand)	149 kg (329 lb.)
Packed dimensions	2560 (W) x 830 (D) x 1035 (H) mm (101 (W) x 32-3/4 (D) x 40-3/4 (H) in.)
Packed weight	200 kg (441 lb.)
Environment	Power on (*9): Temperature: 15 to 32ºC (59 to 90ºF) (20ºC [68ºF] or more recommended), humidity: 35 to 80% (no condensation) Power off: Temperature: 5 to 40˚C (41 to 104˚F), humidity: 20 to 80% (no condensation)